
Certified Transformer Component
Silica Gel Breather Desiccant (25 kg Pack)
By absorbing ambient moisture, silica gel ensures that only dry air enters the transformer conservator during thermal breathing cycles. Care must be taken that the thickness of the active blue layer does not fall below 3 cm, at which point the desiccant must be replaced or regenerated. Furthermore, an oil cup is integrated at the bottom of the dehydrating breather housing to trap dust and airborne particulates before air contacts the insulating oil. To protect the silica gel from oil splashes caused by vibrations during transportation, a sealing blanking plate is installed between the breather flange and the conservator pipe; upon installation, loosen the flange bolts, remove this plate, and retighten the bolts securely.
